CHOOSE YOUR BRAND
Accessory Mounts and Cross-bars
Attach any 5/16” or 1/2” ASE, or T-Bolt Accessory to a Voyager Rack, or any rack made out of 1'“ tubing with our new mounting blocks.
Crossbars, Axe, Shovel, Awning, Light Mounts, Antenna, HAM Antennas, LED Light Bars; Secure almost anything to your roof rack safely and securely with our new CNC Aluminum Mounts.
Attach T-Slot Accessory to any Voyager Rack - in stock ready to go: The Voyager Mount provides (2) 5/16 fine-threaded locations and (1) ASE 1/2 threaded location. Precision made in an ISO 9001 ENVIRONMENT, AND ANODIZED BLACK. .
from $48.00
Universal Mounts:
Quantity:
MADE IN THE USA
Aluminum Block Mounts threaded with 5/16 and 1/2 holes
Anodized Black with Voyager logo
Allows quick install of Solar Panels, MaxTraxx, ActionTraxx, Awnings, Hi-Lift Jack, Shovels, Axes, Fishing Poles, Crossbars, LED Light Bars, Rigging, and more!
LAND ROVER DEFENDER 90/110/130
FULL LENGTH ROOF RACKS
All one-piece Defender racks, shipped to your local dealership, install facility, or doorstep!
Discreet Roof Rack, Low Profile, Fully Assembled (welded) and Powder-Coated. .
Made from 1” DOM tubing
Little to zero wind noise, even on the freeway/motorway
Comes with over 20 locations for lights, awnings, solar panels, surfboard, tie-downs, and more
3 piece wind-deflector included, along with all the hardware needed to install it to the roof (rails NOT required)
Rack will hold 1,000 lbs (professional drivers only)
LAND ROVER LR3 / LR4
ROCK SLIDERS WITH STEP
Our Rock sliders do not protrude down from the vehicle any more than the vehicle itself. They carry a lifetime warrantee, do not rattle, or void your factory warrantee.
1 1/2" DOM tubing
Protrude out from vehicle 4"
Protects against rocks, trees, meteors, zombies
And much more!
DISCOVERY SERIES II
STANDARD VOYAGER RACK
The mother of all racks. Fabricated from a 1" (25mm) Cold Rolled Galvanized Zinc Steel, there is no drilling required. Fully welded by certified and trained welders, in the USA.
Sunroof still opens
1" (25mm) Cold Rolled Galvanized Zinc Steel
No Drilling Required
Tubing is .40mm thick
And much more!
LAND ROVER LR3 / LR4
STANDARD VOYAGER RACK
The world famous LR3 LR4 Voyager Rack. Fabricated from a 1" (25mm) Cold Rolled Galvanized Zinc Steel, there is no drilling required. Fully welded by certified and trained welders, in the USA.
1" (25mm) Cold Rolled Galvanized Zinc Steel
No Drilling Required
Tubing is .40mm thick
Sunroof Compatible
No Rails Required
LAND ROVER DEFENDER 90
COMPLETE HARDTOP KIT
Do you have a Roof on your Soft Top Defender? Or do you want to convert your Defender into a Hard Top, keeping the elements, and prying eyes at bay? This kit includes the roof, sides, corners, rear hatch, shocks, hinges, gaskets, nuts/bolts, and installation support. Comes in Black, or color-matched to your vehicle. Requires 50% down, and 50% upon completion.
Defender 90 Hard Top
$7,499.00
Fits North American Spec, Japan Spec, ONLY (1994, 1995, 1997) - OTHER YEARS BY REQUEST
Shipping cost will be calculated at time of shipping. Shipping to the lower 48, with crate, is generally $1.000.
Includes:
-Roof Section with notches for roll cage
-Side Panels with Clear Tempered Windows pre-installed
-Rear Corner Panels with Clear Tempered Windows pre-installed
-Rear Hatch with Gas Shocks, Shock Brackets, with a Clear Tempered Window
-Door Seals (when available)
-Rear Hatch Seal
-Nuts/Bolts/Washers
Installation will take approximately 8 hours the first time it’s fitted to your Defender 90. There is some drilling required, and a nutsert tool will be needed if your bed doesn’t have existing threads. 1997 Vehicles require different side panels, please contact us after your purchase to confirm your year.
Stock colors can be matched (AA Yellow, Portofino Red, Arles Blue, etc.,.) , otherwise ALL Hard Top pieces come Standard with a BLACK Rubberized Raptor Coating,
ALL ORDERS ARE FILLED IN ORDER OF RECEIPT, WITH AN AVERAGE WAIT TIME OF 90 DAYS.
Quantity:
ABOUT
All of our products are built to order, and made to last:
Founded in 1999, refined in 2006. A lot can change in 20 years! We design all of our products to replace the stock accessory on your vehicle: Whether roof rack, side sills or bumper, with a non-traditional, metallic product. We have saved multiple lives in rollover accidents, even protected an LR4’s roof glass from exploding after rolling 4 times. We purchase only the best North American steel that money can buy, and it shows.
We have countless stories and adventures that we have been a part of, all involving smiles, and miles. Voyager’s products are used worldwide to haul lumber, camping gear, van-life excursions, agriculture, oil, farm, and has been featured in Land Rover World, Land Rover Owners Magazine, TREAD Magazine, Alloy and Grit, and more.
Our products are used in the Filming Industry, as part of the movie, and behind the screen, to assist Producers and SAG members alike. You can find us in MARVEL movie Ant Man and the Wasp, and on the fastest film-car on earth, used on set to film NETFLIX STRANGER THINGS, Season 4..
Within our 7500 sq ft self contained building, we run CNC machines, press brakes, however our bare hands assemble and finish weld every piece that leaves our facility. We employ only those that have a positive attitude, and willingness to be a team player. Certified Weldors, Machinists, and all-around good folks take pride in building a long-lasting, masterfully built accessory. Your adventure awaits.
All of Voyager’s products are MADE IN FLORIDA.
We use Voyager Products every day and hope you will too.
From all of us here at Voyager, thank you for your support!
-VOYAGER-
CONTACT
Call TOLL FREE 844-NAS-RACK ( 844-627-7225 ) to place your order, get shipping quotes, ask questions, etc. We're here to help you figure out the best solution for your needs.
Please feel free to use the form below to submit orders, questions, and anything else you want to ask us about.
